Desktop Resolution Screws Up Every time the monitors adjust
I'm running 3 Way SLI GTX 680s spanned across three 24" 1920x1200 monitors with an additional 21.5" 1920x1080 monitor set as accessory display. When I create my custom bezel adjusted resolution of 6040x1200 everything works fine, but any time the monitors have to adjust, like after playing a game or when windows UAC pops up, my desktop resolution goes all haywire. It's like the resolution on each monitor stretches horizontally so the start menu slides off the screen to the left and everything looks a little distorted. The only way I've found to fix it is to go back in and setup the custom resolution again. All is fine until I play a game or UAC pops up.

Has anyone seen this before and know how to fix it? It's extremely annoying especially since I have to shut down LCore.exe every time before I can readjust my resolution. It only started doing this after I added the accessory display.
I'm running 3 Way SLI GTX 680s spanned across three 24" 1920x1200 monitors with an additional 21.5" 1920x1080 monitor set as accessory display. When I create my custom bezel adjusted resolution of 6040x1200 everything works fine, but any time the monitors have to adjust, like after playing a game or when windows UAC pops up, my desktop resolution goes all haywire. It's like the resolution on each monitor stretches horizontally so the start menu slides off the screen to the left and everything looks a little distorted. The only way I've found to fix it is to go back in and setup the custom resolution again. All is fine until I play a game or UAC pops up.



Has anyone seen this before and know how to fix it? It's extremely annoying especially since I have to shut down LCore.exe every time before I can readjust my resolution. It only started doing this after I added the accessory display.

Case: Thermaltake Level 10 GT
PSU: Cooler Master Silent Pro Gold 1200W
Mobo: Asus Rampage IV Extreme X79
CPU: Sandy Bridge-E i7-3930k @ 4.8ghz
Cooler: Corsair H100 push/pull config 4x120mm
RAM: 32GB(8x4) GeIL EVO Corsa 2400mhz (PC3 19200)
GPUs: 3x GTX 680 2GB 3 Way SLI
Main Displays: 24" Dell U2410 IPS Ultrasharp and 2x 24" Dell 2407WFP-HC Ultrasharps (6040x1200 2D surround)
Accessory Display: 21.5" Asus VS229H-P IPS 1920x1080
HDs: OS: 60GB OCZ Agility 3 SSD; Games: 120GB Corsair Force 3 SSD; Apps: 128GB Crucial M225 SSD; Storage: 1TB Samsung Spinpoint F1
OS: Windows 7 Ultimate

#1
Posted 04/13/2012 11:49 PM   
A little more info. It seems to be an issue with custom resolutions for bezel adjustments and having a fourth monitor enabled. If I disable the fourth monitor the bezel adjustments will work fine without screwing up the desktop scaling. If I enable the fourth monitor and use standard resolutions without bezel adjustments it will work fine. I've tried this with both 301.10 and 301.24 drivers.
A little more info. It seems to be an issue with custom resolutions for bezel adjustments and having a fourth monitor enabled. If I disable the fourth monitor the bezel adjustments will work fine without screwing up the desktop scaling. If I enable the fourth monitor and use standard resolutions without bezel adjustments it will work fine. I've tried this with both 301.10 and 301.24 drivers.

Case: Thermaltake Level 10 GT
PSU: Cooler Master Silent Pro Gold 1200W
Mobo: Asus Rampage IV Extreme X79
CPU: Sandy Bridge-E i7-3930k @ 4.8ghz
Cooler: Corsair H100 push/pull config 4x120mm
RAM: 32GB(8x4) GeIL EVO Corsa 2400mhz (PC3 19200)
GPUs: 3x GTX 680 2GB 3 Way SLI
Main Displays: 24" Dell U2410 IPS Ultrasharp and 2x 24" Dell 2407WFP-HC Ultrasharps (6040x1200 2D surround)
Accessory Display: 21.5" Asus VS229H-P IPS 1920x1080
HDs: OS: 60GB OCZ Agility 3 SSD; Games: 120GB Corsair Force 3 SSD; Apps: 128GB Crucial M225 SSD; Storage: 1TB Samsung Spinpoint F1
OS: Windows 7 Ultimate

#2
Posted 04/14/2012 01:35 AM   
Scroll To Top