3dfx Voodoo5 6000 Watercooling Legend Edition First part
  1 / 2    
Hello,

I am a 3dfx fan.

I have a project : [B][COLOR=red]Voodoo5 6000 rev.3700A WaterCooling Legend Edition[/COLOR][/B]. [I](with a special hard work of an excellent man)[/I]

[IMG]http://img15.hostingpics.net/pics/773068Voodoo5k6twelftha.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/541930Voodoo5k6twelfthg.jpg[/IMG]

[U]Step by step :[/U]

- [B]Waterblocks [/B]:

[I]That is the coding that allows the machine to make that logo on front waterblock[/I]

[IMG]http://img11.hostingpics.net/pics/5080113dfxlogoproto.jpg[/IMG]

[I]Delrin + Copper[/I]

[IMG]http://img15.hostingpics.net/pics/261386delrincopper.jpg[/IMG]

[I]Voodoo5 6000 heatsinks removed[/I]

[IMG]http://img15.hostingpics.net/pics/974503v5k6heatsinksoff.jpg[/IMG]

[I]Just a quick sketch up of the card and what needs to be cooled.[/I]
[I]the green is the pcb, the bright red is the HiNT chip, and the 4 squares are the GPU's.[/I]

[IMG]http://img15.hostingpics.net/pics/780325sketchup.jpg[/IMG]

[I]The whole back of the card will be cooled.* One large block.* a large single piece of thermal tape will be used.[/I]

[I]The one large sheet will touch every inch of the board and pull the heat off.[/I]

[I]the chips themselves get hot. The back of the chips were probably getting hot from the lack of cooling on the top of them.[/I]

[I]This rear block will take off any heat the top block will produce.* It will pull any heat off of every component that it touches.[/I]

[IMG]http://img11.hostingpics.net/pics/236569Voodoo02.jpg[/IMG]

[I]A CAD model of the card.* Things to cool in black, and things to avoid in red, and the very limited holes in the board.[/I]

[IMG]http://img11.hostingpics.net/pics/533799Voodoo01.jpg[/IMG]

[I]Basic overall shape :[/I]

[IMG]http://img15.hostingpics.net/pics/798457Voodoo03.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/715695Voodoo04.jpg[/IMG]

[I]The blue outline that is the funny shape is the copper[/I]
[I]the black outline is the overall card.[/I]
[I]The copper is what needs to be touching the chips, so I will avoid all those red areas.[/I]
[I]The plastic is thick enough to just mill out depressions for the components.[/I]
[I]So the black plastic will cover the entire card[/I]
[I]giving you the sleek appearance of a seamless block.[/I]
[I]A copper plate that touches the HiNT chip, GPU's and Ram.[/I]
[I]Then the black plastic is a much larger piece that covers most of the card.[/I]
[I]Each block will be 19mm thick.[/I]
[I]V5k6 card is 1.6mm thick, and 19mm of copper and plastic on each side[/I]

[I]All of my stuff (WaterCooling kit).[/I]
[I]I can't put into words, how powerful just one of those fans are.[/I]
[I]I will have to screw this thing to a table. [/I]
[I]I firmly believe that the radiator will levitate if all three are on.[/I]
[I]I am still speechless from the power of a single fan. [/I]
[I]I have all the power imaginable, and it sounds like a jet starting up :)[/I]

[IMG]http://img15.hostingpics.net/pics/315915list.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/241372watercoolingkit.jpg[/IMG]

[I]Delta Fans 120 mm * 38 mm - 252 CFM ai capacity* [/I]:

[IMG]http://img15.hostingpics.net/pics/138184watercoolingkitfans.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/404139Machine.jpg[/IMG]

Here is a print to scale (I hope) version of the copper section of the waterblock.

[IMG]http://img11.hostingpics.net/pics/306626printoscale.jpg[/IMG]

[I]The plastic top part will have the same top and left boundaries. [/I]

[I]Cut a prototype out of aluminum[/I]

[I]Here is a basic prototype of the copper board that will touch all the chips.[/I]

[IMG]http://img11.hostingpics.net/pics/356098proto.jpg[/IMG]
[I]A few minor improvements to a few lines of code and it will be ready to cut. [/I]

[B][U]Block progress :[/U][/B]

[I]The backside blocks initial outer shape is cut. Fits like a charm.[/I]

[IMG]http://img11.hostingpics.net/pics/252793blockprogress1.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/169861milling1.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/921631milling2.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/855447milling3.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/708993milling4.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/719926milling5.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/881878milling6.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/750424blockprogress2.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/204079blockprogress3.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/545242blockprogress4.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/665902blockprogressa.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/294454blockprogress5.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/841920blockprogress6.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/491491blockprogress7.jpg[/IMG]

[I]Milling of the Vram section: [/I]

[IMG]http://img15.hostingpics.net/pics/292564blockprogress8.jpg[/IMG]

[I]I have good news and bad news. The bad news is the O-ring sealing didnt work. Thats a simple fix-i will seal it with a silicone gasket sealant along with the O-rings. So thats really not a big issue. It will never ever leak. [/I]
[I]The good news is the block is very effective. when i was doing the leak test i pumped some cold water and the block instantly got very cold. The performance of these blocks are very good![/I]

[IMG]http://img11.hostingpics.net/pics/612373blockprogress9.jpg[/IMG]

[I]The blocks are just about finished as far as basic construction.[/I]

[I]I came up with an idea to make a seperate plate for it with the logo. I attached a pic of the 0.25" plate.* The logo will go on that plate to give it some personality.[/I]

[IMG]http://img11.hostingpics.net/pics/615963blockprogress10.jpg[/IMG]

[I]Beginning 3dfx logo :[/I]

[IMG]http://img11.hostingpics.net/pics/2255373dfxlogo.jpg[/IMG]

[I]Cutting the plate :[/I]

[IMG]http://img15.hostingpics.net/pics/429465blockprogress11.jpg[/IMG]

I wanted to have copper in the logo correct.

Sheet copper for the logo arrived (0.032" sheet copper).
...Working on logo now :-)...

[I]Still a little more work to do, but its getting there :[/I]

[IMG]http://img11.hostingpics.net/pics/9656253dfxlogo1.jpg[/IMG]

[I]This is the overall size of the logo. Now comes the hard part, filling that logo with a solid sheet of polished copper.[/I]

[IMG]http://img15.hostingpics.net/pics/9691593dfxlogo2.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/7163273dfxlogo3.jpg[/IMG]

[I]The next step is trying to cut the identical logo out of copper, just a hair smaller so it drops right into that logo and glue it into place.[/I]

[I]Filling 3dfx logo with copper :[/I]

[IMG]http://img11.hostingpics.net/pics/7328013dfxlogo4.jpg[/IMG]

[B]Video :[/B]

[I]3dfx logo in action :[/I]

[URL]http://www.youtube.com/watch?v=QJy7g9QmU5w[/URL]

Magic moment no?

[I]The end of the "X" is 0.7mm thick.* That was no easy task[/I]
[I]Here are the results :)[/I]


[IMG]http://img11.hostingpics.net/pics/2806713dfxlogo6.jpg[/IMG]

[I]A close up of the end of that swoosh: [/I]

[IMG]http://img11.hostingpics.net/pics/6279483dfxlogo7.jpg[/IMG]
[I]0.8mm thick.[/I]

[I]A view of my backyard:[/I]

[IMG]http://img11.hostingpics.net/pics/9872993dfxlogo8.jpg[/IMG]

[I]An overall finished logo:[/I]

[IMG]http://img11.hostingpics.net/pics/5200133dfxlogo9.jpg[/IMG]

[B]Rear Plastic :[/B]

[U]Voodoo5 6000 logo :[/U]

[I]First step :[/I]

[IMG]http://img11.hostingpics.net/pics/253601Voodoo56000logo1.jpg[/IMG]

[I]Front waterblock:[/I]

[IMG]http://img11.hostingpics.net/pics/910303frontblock.jpg[/IMG]

[I]He came across a slight problem. H can't mount the plate without covering the holes.[/I]
[I]Rear plate would cover up holes. [/I]
[I]The solution is I stick it on.[/I]
[I]I can purchase a special role of tape so I can remove it whenever I want.[/I]
[I]I can purchase some extra tape to stick the rear plate on waterblock.[/I]
[I]That is a very easy solution.[/I]

[IMG]http://img11.hostingpics.net/pics/805308rearblock1.jpg[/IMG]

[I]Still trying to dress up the Voodoo5 plate, but here its almost finished. Both blocks are sealed watertight now. Just awaiting installation...[/I]

[IMG]http://img11.hostingpics.net/pics/4061732blocks.jpg[/IMG]

[I]I present to you the completed front side GPU block:[/I]

[IMG]http://img11.hostingpics.net/pics/949022frontblock2.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/725848frontblock3.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/936040frontblock4.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/122401completewaterblocks1.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/726575completewaterblocks2.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/122401completewaterblocks1.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/726575completewaterblocks2.jpg[/IMG]

[B]Voodoo5 6000 logo:[/B]

[I]Video :[/I]

[URL]http://www.youtube.com/watch?v=g6dtdUe1NqU[/URL]

[IMG]http://img15.hostingpics.net/pics/944582Voodoo56000logo.jpg[/IMG]

[I]Here is the finished plate.* He put tape on the back so I can stick it on when I want.[/I]

[IMG]http://img15.hostingpics.net/pics/768369Voodoo56000logo2.jpg[/IMG]

[I]He have been test fitting the contact of the card for hours...[/I]

[IMG]http://img15.hostingpics.net/pics/320675thermalpadsonV5k6.jpg[/IMG]

[B]Bonus Time:[/B]

[I]The POWER of Delta fans:[/I]

[URL]http://www.youtube.com/watch?v=n9_L_Rz6H5M[/URL]

[I]3dfx waterblock leak test:[/I]

[URL]http://www.youtube.com/watch?v=LR_L9in2AiE[/URL]

[U]The last part:[/U]

[I]Enclosing a bag of spacers (washers) that are plastic. They need to be stacked 2 high on each side of the card.[/I]

[IMG]http://img15.hostingpics.net/pics/259196last1.jpg[/IMG]

[B][U]The 3dfx Voodoo5 6000 Watercooling Legend Edition:[/U][/B]

[IMG]http://img15.hostingpics.net/pics/844091last2.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/522572last3.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/873677last4.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/440367last5.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/462591last6.jpg[/IMG]


Thanks for Nateman_doo.

An Amazing Man...
Hello,



I am a 3dfx fan.



I have a project : Voodoo5 6000 rev.3700A WaterCooling Legend Edition. (with a special hard work of an excellent man)



Image



Image



Step by step :



- Waterblocks :



That is the coding that allows the machine to make that logo on front waterblock



Image



Delrin + Copper



Image



Voodoo5 6000 heatsinks removed



Image



Just a quick sketch up of the card and what needs to be cooled.

the green is the pcb, the bright red is the HiNT chip, and the 4 squares are the GPU's.



Image



The whole back of the card will be cooled.* One large block.* a large single piece of thermal tape will be used.



The one large sheet will touch every inch of the board and pull the heat off.



the chips themselves get hot. The back of the chips were probably getting hot from the lack of cooling on the top of them.



This rear block will take off any heat the top block will produce.* It will pull any heat off of every component that it touches.



Image



A CAD model of the card.* Things to cool in black, and things to avoid in red, and the very limited holes in the board.



Image



Basic overall shape :



Image



Image

The blue outline that is the funny shape is the copper

the black outline is the overall card.

The copper is what needs to be touching the chips, so I will avoid all those red areas.

The plastic is thick enough to just mill out depressions for the components.

So the black plastic will cover the entire card

giving you the sleek appearance of a seamless block.

A copper plate that touches the HiNT chip, GPU's and Ram.

Then the black plastic is a much larger piece that covers most of the card.

Each block will be 19mm thick.

V5k6 card is 1.6mm thick, and 19mm of copper and plastic on each side



All of my stuff (WaterCooling kit).

I can't put into words, how powerful just one of those fans are.

I will have to screw this thing to a table.

I firmly believe that the radiator will levitate if all three are on.

I am still speechless from the power of a single fan.

I have all the power imaginable, and it sounds like a jet starting up :)



Image



Image



Delta Fans 120 mm * 38 mm - 252 CFM ai capacity* :



Image



Image



Here is a print to scale (I hope) version of the copper section of the waterblock.



Image



The plastic top part will have the same top and left boundaries.



Cut a prototype out of aluminum



Here is a basic prototype of the copper board that will touch all the chips.



Image

A few minor improvements to a few lines of code and it will be ready to cut.



Block progress :



The backside blocks initial outer shape is cut. Fits like a charm.



Image



Image



Image



Image

Image



Image



Image



Image



Image



Image



Image



Image



Image



Image

Milling of the Vram section:



Image



I have good news and bad news. The bad news is the O-ring sealing didnt work. Thats a simple fix-i will seal it with a silicone gasket sealant along with the O-rings. So thats really not a big issue. It will never ever leak.

The good news is the block is very effective. when i was doing the leak test i pumped some cold water and the block instantly got very cold. The performance of these blocks are very good!



Image



The blocks are just about finished as far as basic construction.



I came up with an idea to make a seperate plate for it with the logo. I attached a pic of the 0.25" plate.* The logo will go on that plate to give it some personality.



Image



Beginning 3dfx logo :



Image



Cutting the plate :



Image



I wanted to have copper in the logo correct.



Sheet copper for the logo arrived (0.032" sheet copper).

...Working on logo now :-)...



Still a little more work to do, but its getting there :



Image



This is the overall size of the logo. Now comes the hard part, filling that logo with a solid sheet of polished copper.



Image



Image



The next step is trying to cut the identical logo out of copper, just a hair smaller so it drops right into that logo and glue it into place.



Filling 3dfx logo with copper :



Image



Video :



3dfx logo in action :



[URL] />


Magic moment no?

The end of the "X" is 0.7mm thick.* That was no easy task

Here are the results :)





Image



A close up of the end of that swoosh:



Image

0.8mm thick.



A view of my backyard:



Image



An overall finished logo:



Image



Rear Plastic :



Voodoo5 6000 logo :



First step :



Image



Front waterblock:



Image



He came across a slight problem. H can't mount the plate without covering the holes.

Rear plate would cover up holes.

The solution is I stick it on.

I can purchase a special role of tape so I can remove it whenever I want.

I can purchase some extra tape to stick the rear plate on waterblock.

That is a very easy solution.



Image



Still trying to dress up the Voodoo5 plate, but here its almost finished. Both blocks are sealed watertight now. Just awaiting installation...



Image



I present to you the completed front side GPU block:



Image



Image



Image



Image



Image

Image



Image



Voodoo5 6000 logo:



Video :



[URL] />


Image



Here is the finished plate.* He put tape on the back so I can stick it on when I want.



Image



He have been test fitting the contact of the card for hours...



Image



Bonus Time:



The POWER of Delta fans:



[URL] />


3dfx waterblock leak test:



[URL] />


The last part:



Enclosing a bag of spacers (washers) that are plastic. They need to be stacked 2 high on each side of the card.



Image



The 3dfx Voodoo5 6000 Watercooling Legend Edition:



Image



Image



Image



Image



Image





Thanks for Nateman_doo.



An Amazing Man...

#1
Posted 04/07/2012 09:27 PM   
[U]Videos :[/U]

First :

[URL]http://www.youtube.com/watch?v=ci7J7gEdsrk[/URL]

Second :

[URL]http://www.youtube.com/watch?v=4M9pWfutlXM[/URL]

Third :

[URL]http://youtu.be/QiQyRnStHGU[/URL]

I just received package with the [b]3dfx Voodoo5 6000 Watercooling Legend Edition[/b]...

[i]Here are the pictures:[/i]

[i]Unpacking...[/i]

[IMG]http://img15.hostingpics.net/pics/170754unpacking1.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/731350unpacking2.jpg[/IMG]

[i]The card ::)[/i]

[IMG]http://img15.hostingpics.net/pics/274866Voodoo5k6legenda.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/432454Voodoo5k6legendb.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/819138Voodoo5k6legendc.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/505694Voodoo5k6legendd.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/165419Voodoo5k6legende.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/900395Voodoo5k6legendf.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/382497Voodoo5k6legendg.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/921557Voodoo5k6legendh.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/168580Voodoo5k6legendi.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/537985Voodoo5k6legendj.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/476211Voodoo5k6legendk.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/325539Voodoo5k6legendl.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/472065Voodoo5k6legendm.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/413438Voodoo5k6legendn.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/625396Voodoo5k6legendo.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/751603Voodoo5k6legendp.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/935767Voodoo5k6legendq.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/883442Voodoo5k6legendr.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/740612Voodoo5k6legends.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/627097Voodoo5k6legendt.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/600070Voodoo5k6legendu.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/677598Voodoo5k6legendv.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/394841Voodoo5k6legendw.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/645727Voodoo5k6legendx.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/901584Voodoo5k6legendy.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/318348Voodoo5k6legendz.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/702903Voodoo5k6legendz1.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/659935Voodoo5k6legendz2.jpg[/IMG]

[IMG]http://img15.hostingpics.net/pics/412284Voodoo5k6legendz3.jpg[/IMG]

Today, I have tested the Voodoo5 6000 Watercooling Legend Edition booting without water.
Just to see if the card boot...

[i]Here are results and pictures:[/i]

[i]Card and Adaptors ready to test:[/i]

[IMG]http://img11.hostingpics.net/pics/828711test1.jpg[/IMG]

[i]Assembled:[/i]

[IMG]http://img11.hostingpics.net/pics/468812test2.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/275870test3.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/562467test4.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/859464test5.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/519258test6.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/921814test7.jpg[/IMG]

[i]Complete PC with the card:[/i]

[IMG]http://img11.hostingpics.net/pics/817143test8.jpg[/IMG]

[i]Turn ON:[/i]

[IMG]http://img11.hostingpics.net/pics/191930test9.jpg[/IMG]

[i]V5k6 Bios:[/i]

[IMG]http://img11.hostingpics.net/pics/260561test10.jpg[/IMG]

[i]Booting video:[/i]

[URL]http://youtu.be/kk-0aPfs2pc[/URL]

As you can see, this is a successful booting test :)

Your reactions?

Best Regards,

Trevormacro
Videos :



First :



[URL] />


Second :



[URL] />


Third :



http://youtu.be/QiQyRnStHGU



I just received package with the 3dfx Voodoo5 6000 Watercooling Legend Edition...



Here are the pictures:



Unpacking...



Image



Image



The card ::)



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Image



Today, I have tested the Voodoo5 6000 Watercooling Legend Edition booting without water.

Just to see if the card boot...



Here are results and pictures:



Card and Adaptors ready to test:



Image



Assembled:



Image



Image



Image



Image



Image



Image



Complete PC with the card:



Image



Turn ON:



Image



V5k6 Bios:



Image



Booting video:



http://youtu.be/kk-0aPfs2pc



As you can see, this is a successful booting test :)



Your reactions?



Best Regards,



Trevormacro

#2
Posted 04/07/2012 09:36 PM   
I think you're crazy to spend that much time on it, but it looks very good and I'm impressed. I was also a big 3dfx fan. I had the Obsidian 2 X-24 and loved that card. Wish I still had it. I think I sold it for $25.00 a long time ago.
I think you're crazy to spend that much time on it, but it looks very good and I'm impressed. I was also a big 3dfx fan. I had the Obsidian 2 X-24 and loved that card. Wish I still had it. I think I sold it for $25.00 a long time ago.

Case: Thermaltake Level 10 GT
PSU: Cooler Master Silent Pro Gold 1200W
Mobo: Asus Rampage IV Extreme X79
CPU: Sandy Bridge-E i7-3930k @ 4.8ghz
Cooler: Corsair H100 push/pull config 4x120mm
RAM: 32GB(8x4) GeIL EVO Corsa 2400mhz (PC3 19200)
GPUs: 3x GTX 680 2GB 3 Way SLI
Main Displays: 24" Dell U2410 IPS Ultrasharp and 2x 24" Dell 2407WFP-HC Ultrasharps (6040x1200 2D surround)
Accessory Display: 21.5" Asus VS229H-P IPS 1920x1080
HDs: OS: 60GB OCZ Agility 3 SSD; Games: 120GB Corsair Force 3 SSD; Apps: 128GB Crucial M225 SSD; Storage: 1TB Samsung Spinpoint F1
OS: Windows 7 Ultimate

#3
Posted 04/07/2012 10:50 PM   
Can it play Crysis /teehee.gif' class='bbc_emoticon' alt=':teehee:' />
Can it play Crysis /teehee.gif' class='bbc_emoticon' alt=':teehee:' />

Making stupid look good.



Rig:

Thermaltake Armor

Q9650 @ 4.05, 1800FSB

Striker II Extreme

4GB Patriot 2000 @ 8-8-8-26

x2 150GB WD VRaptor Drives in RAID 0

x2 Segate 320GB RAID 0 Secondary Data Backup

-1TB and 750GB Western Digital Mybooks for backup

x3 EVGA 9800 GTX+ SLI @ 1.45V ~900 core, 2300 shader, 1250 mem



Watercooling:

FuZion 2.0

Enzotech NB Block

x3 Swiftech Obsidians

MCP 655 With EK Top Rev 2

120 and 240 Black Ice Pro GT Stealth Rads

120 DangerDen XFlow rad



http://forums.nvidia.com/index.php?showtopic=145895: Watercooling Guide for Beginners



http://forums.nvidia.com/index.php?showtopic=138732: Watercooling Pics Posted Here

#4
Posted 04/08/2012 12:54 AM   
Great work on that block!
Great work on that block!

Core i7 960 @4.14Ghz 180x23 1.3v Liquid cooled

Gigabyte G1. Assassin

EVGA GTX 560 Ti "Maximum Graphics Crysis 2"

Cooler Master HAF-X

Corsair Dominator GT CMT12GX3M3A2000C9 RAM

RMA broke my 580 SLI. Now I have a 7970 and a GTX 580 gathering dust, looking for a buyer.

#5
Posted 04/08/2012 02:15 AM   
[quote name='StAndrew' date='08 April 2012 - 12:54 AM' timestamp='1333846482' post='1393174']
Can it play Crysis /teehee.gif' class='bbc_emoticon' alt=':teehee:' />
[/quote]

Sure not /wink.gif' class='bbc_emoticon' alt=';)' />
This card is released in year 2000.
[quote name='StAndrew' date='08 April 2012 - 12:54 AM' timestamp='1333846482' post='1393174']

Can it play Crysis /teehee.gif' class='bbc_emoticon' alt=':teehee:' />





Sure not /wink.gif' class='bbc_emoticon' alt=';)' />

This card is released in year 2000.

#6
Posted 04/08/2012 02:15 PM   
I have one question:

Is it possible to a man who work at Nvidia to make an article about this legendary watercooled card?

Feel free if anyone can help me to contact this man.

Thanks in advance

Regards,

Trevormacro
I have one question:



Is it possible to a man who work at Nvidia to make an article about this legendary watercooled card?



Feel free if anyone can help me to contact this man.



Thanks in advance



Regards,



Trevormacro

#7
Posted 04/08/2012 02:29 PM   
Awesome, that looks fantastic. I was always a huge fan of the Voodoo cards. I even used to run Voodoo 2 SLI and boy was it the Bees knees back in the day. GL Quake FTW. :)
Awesome, that looks fantastic. I was always a huge fan of the Voodoo cards. I even used to run Voodoo 2 SLI and boy was it the Bees knees back in the day. GL Quake FTW. :)

I7 2600k @5Ghz | Asus P8Z68-V Pro | SS Phase Change | Corsair AX1200 watt PSU | G-Skill 1600CL7 | Asus GTX680 x2 SLI | Lian-Li PC8N-WX | Intel 520 120GB SSD | HP ZR24w 24" S-IPS x3 Nvidia Surround | Samsung S27A950D 27" 120Hz LCD

#8
Posted 04/18/2012 07:18 AM   
Very nice block!
Very nice block!



8130p @ 5.1Ghz : GTX 570 x2 - cuda workstation



i5-2500k @ 4.4Ghz : GTX 570 - itx media pc

#9
Posted 04/18/2012 12:31 PM   
Hello,

Today I make Quake 3 Benchmark with my Voodoo5 6000 Watercooling Legend Edition card at different frequencies.

Here are the results...

[i]Picture:[/i]

[IMG]http://img11.hostingpics.net/pics/275940V5k6LegendTest.jpg[/IMG]

[i]Video:[/i]

http://youtu.be/bn7sQCIb00U

Any Reactions?
Hello,



Today I make Quake 3 Benchmark with my Voodoo5 6000 Watercooling Legend Edition card at different frequencies.



Here are the results...



Picture:



Image



Video:



http://youtu.be/bn7sQCIb00U



Any Reactions?

#10
Posted 04/20/2012 04:06 PM   
Hi,

Today, I have tested my card with a new frequency.

Now, the Delta Fans don't touch the desktop.

[i]Pictures:[/i]

[IMG]http://img11.hostingpics.net/pics/797357V5k6withQuake3.jpg[/IMG]

[IMG]http://img11.hostingpics.net/pics/209027V5k6withQuake32.jpg[/IMG]

[i]Video:[/i]

http://www.youtube.com/watch?v=WH2V_RcuX74


Any reactions?
Hi,



Today, I have tested my card with a new frequency.



Now, the Delta Fans don't touch the desktop.



Pictures:



Image



Image



Video:



/>




Any reactions?

#11
Posted 04/23/2012 12:11 PM   
absolutely awesome block. That looks stunning. Loved my 3dfx banshee, that card allowed me to play such cool games back then :)
absolutely awesome block. That looks stunning. Loved my 3dfx banshee, that card allowed me to play such cool games back then :)

#12
Posted 04/23/2012 04:00 PM   
[quote name='Genesis1' date='23 April 2012 - 04:00 PM' timestamp='1335196802' post='1399895']
absolutely awesome block. That looks stunning. Loved my 3dfx banshee, that card allowed me to play such cool games back then :)
[/quote]

Thank you :)
3dfx forever...
[quote name='Genesis1' date='23 April 2012 - 04:00 PM' timestamp='1335196802' post='1399895']

absolutely awesome block. That looks stunning. Loved my 3dfx banshee, that card allowed me to play such cool games back then :)





Thank you :)

3dfx forever...

#13
Posted 04/23/2012 07:06 PM   
Just a little video of my Voodoo5 6000 Gold Second Edition:

http://youtu.be/4cIxVEkxfzo

Your opinions?
Just a little video of my Voodoo5 6000 Gold Second Edition:



http://youtu.be/4cIxVEkxfzo




Your opinions?

#14
Posted 04/27/2012 07:47 PM   
[quote name='trevormacro' date='27 April 2012 - 08:47 PM' timestamp='1335556035' post='1401705']
Just a little video of my Voodoo5 6000 Gold Second Edition:

http://youtu.be/4cIxVEkxfzo

Your opinions?
[/quote]

Awesome! The Super Metroid music was a nice touch :)

Overall, the job you did on the block was excellent to say the least. I've always wanted to do a similar project being that I work with CNC machining centers every day of my life. I would have probably picked a more modern GPU, but I can understand the sentimental attachment to 3dfx. Sadly, I never had the willpower to spend enough free time on a project of that scale, but man I do regret it after seeing your final result.

/thanks.gif' class='bbc_emoticon' alt=':thanks:' /> for taking the time to post this here. It's just so refreshing to see projects like this on the forum. I hope to see more in the future.
[quote name='trevormacro' date='27 April 2012 - 08:47 PM' timestamp='1335556035' post='1401705']

Just a little video of my Voodoo5 6000 Gold Second Edition:



http://youtu.be/4cIxVEkxfzo




Your opinions?





Awesome! The Super Metroid music was a nice touch :)



Overall, the job you did on the block was excellent to say the least. I've always wanted to do a similar project being that I work with CNC machining centers every day of my life. I would have probably picked a more modern GPU, but I can understand the sentimental attachment to 3dfx. Sadly, I never had the willpower to spend enough free time on a project of that scale, but man I do regret it after seeing your final result.



/thanks.gif' class='bbc_emoticon' alt=':thanks:' /> for taking the time to post this here. It's just so refreshing to see projects like this on the forum. I hope to see more in the future.

EVGA E758 A1 X58 // Core i7 920@4Ghz // OCZ Platinum DDR3 1600 // EVGA GTX 670 SLI // Seasonic X Series Gold 1050w // Corsair 800D // Dual Dell Ultrasharp U2410 displays // Dell Ultrasharp 2408WFP

#15
Posted 04/28/2012 02:23 AM   
  1 / 2    
Scroll To Top