Gtx 590 gpu1 running hot
  1 / 3    
do i need to worry about the gtx 590 gpu1 running 10-12C hotter then gpu2? in crysis 2 ultra "1920-1080" it was at gpu1 89c and gpu2 78c
Normal it was just 1-3C different on the low temp but after reinstall of win 7 it have been like this.
i have tryed reinstalling nvidia drivers but still the same. i have looked at settings in Nvidia options, and it is all fine.
Shall i try using a air dust to clean or will that just push the dust into the dual vapor champers or is there a SAFE way to open the cover.

I use MSI afterburner to set fan speed. it says GPU1 fan speed 0% and GPU2 shows my speed. Are there more then 1 fan, that i cant see?
do i need to worry about the gtx 590 gpu1 running 10-12C hotter then gpu2? in crysis 2 ultra "1920-1080" it was at gpu1 89c and gpu2 78c

Normal it was just 1-3C different on the low temp but after reinstall of win 7 it have been like this.

i have tryed reinstalling nvidia drivers but still the same. i have looked at settings in Nvidia options, and it is all fine.

Shall i try using a air dust to clean or will that just push the dust into the dual vapor champers or is there a SAFE way to open the cover.



I use MSI afterburner to set fan speed. it says GPU1 fan speed 0% and GPU2 shows my speed. Are there more then 1 fan, that i cant see?

#1
Posted 02/27/2012 12:51 AM   
[quote name='cociotfp' date='27 February 2012 - 12:51 AM' timestamp='1330303909' post='1375524']
do i need to worry about the gtx 590 gpu1 running 10-12C hotter then gpu2? in crysis 2 ultra "1920-1080" it was at gpu1 89c and gpu2 78c
Normal it was just 1-3C different on the low temp but after reinstall of win 7 it have been like this.
i have tryed reinstalling nvidia drivers but still the same. i have looked at settings in Nvidia options, and it is all fine.
Shall i try using a air dust to clean or will that just push the dust into the dual vapor champers or is there a SAFE way to open the cover.

I use MSI afterburner to set fan speed. it says GPU1 fan speed 0% and GPU2 shows my speed. Are there more then 1 fan, that i cant see?
[/quote]

/blink.gif' class='bbc_emoticon' alt=':blink:' /> There is only 1 fan in this monster and the card ran a good time so the ventilation must be good if nothing has changed inside the case /tongue.gif' class='bbc_emoticon' alt=':tongue:' />
Give it a good dustclean and it will be fine /biggrin.gif' class='bbc_emoticon' alt=':biggrin:' />
You can take it apart but why if you can give it a good blow (from the fan outworth front and rear)
[quote name='cociotfp' date='27 February 2012 - 12:51 AM' timestamp='1330303909' post='1375524']

do i need to worry about the gtx 590 gpu1 running 10-12C hotter then gpu2? in crysis 2 ultra "1920-1080" it was at gpu1 89c and gpu2 78c

Normal it was just 1-3C different on the low temp but after reinstall of win 7 it have been like this.

i have tryed reinstalling nvidia drivers but still the same. i have looked at settings in Nvidia options, and it is all fine.

Shall i try using a air dust to clean or will that just push the dust into the dual vapor champers or is there a SAFE way to open the cover.



I use MSI afterburner to set fan speed. it says GPU1 fan speed 0% and GPU2 shows my speed. Are there more then 1 fan, that i cant see?





/blink.gif' class='bbc_emoticon' alt=':blink:' /> There is only 1 fan in this monster and the card ran a good time so the ventilation must be good if nothing has changed inside the case /tongue.gif' class='bbc_emoticon' alt=':tongue:' />

Give it a good dustclean and it will be fine /biggrin.gif' class='bbc_emoticon' alt=':biggrin:' />

You can take it apart but why if you can give it a good blow (from the fan outworth front and rear)

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#2
Posted 02/27/2012 10:54 AM   
[quote name='*Scar*' date='27 February 2012 - 11:54 AM' timestamp='1330340071' post='1375675']
/blink.gif' class='bbc_emoticon' alt=':blink:' /> There is only 1 fan in this monster and the card ran a good time so the ventilation must be good if nothing has changed inside the case /tongue.gif' class='bbc_emoticon' alt=':tongue:' />
Give it a good dustclean and it will be fine /biggrin.gif' class='bbc_emoticon' alt=':biggrin:' />
You can take it apart but why if you can give it a good blow (from the fan outworth front and rear)
[/quote]

But do i need to be worry about the differnt in temps?
[quote name='*Scar*' date='27 February 2012 - 11:54 AM' timestamp='1330340071' post='1375675']

/blink.gif' class='bbc_emoticon' alt=':blink:' /> There is only 1 fan in this monster and the card ran a good time so the ventilation must be good if nothing has changed inside the case /tongue.gif' class='bbc_emoticon' alt=':tongue:' />

Give it a good dustclean and it will be fine /biggrin.gif' class='bbc_emoticon' alt=':biggrin:' />

You can take it apart but why if you can give it a good blow (from the fan outworth front and rear)





But do i need to be worry about the differnt in temps?

#3
Posted 02/27/2012 04:13 PM   
Don't think so you need to worry /rolleyes.gif' class='bbc_emoticon' alt=':rolleyes:' />
Don't think so you need to worry /rolleyes.gif' class='bbc_emoticon' alt=':rolleyes:' />
[quote name='cociotfp' date='27 February 2012 - 04:13 PM' timestamp='1330359189' post='1375756']
But do i need to be worry about the differnt in temps?
[/quote]

1-3 degree is normal and a difference of 10 could be dust or the ventilation
[quote name='cociotfp' date='27 February 2012 - 04:13 PM' timestamp='1330359189' post='1375756']

But do i need to be worry about the differnt in temps?





1-3 degree is normal and a difference of 10 could be dust or the ventilation

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#5
Posted 02/27/2012 06:53 PM   
[quote name='*Scar*' date='27 February 2012 - 07:53 PM' timestamp='1330368805' post='1375815']
1-3 degree is normal and a difference of 10 could be dust or the ventilation
[/quote]

I have used a airdust spray but it is still the same 10-12c in temp.
i have a Thermaltake Element V with:
2 front fans 120mm "in"
1 top 200mm "out"
1 rear 120mm Antec KÃœHLER H2O 920 "dual fan" "out"
2 rear 50mm "out"
1 side 200mm "in"
[quote name='*Scar*' date='27 February 2012 - 07:53 PM' timestamp='1330368805' post='1375815']

1-3 degree is normal and a difference of 10 could be dust or the ventilation





I have used a airdust spray but it is still the same 10-12c in temp.

i have a Thermaltake Element V with:

2 front fans 120mm "in"

1 top 200mm "out"

1 rear 120mm Antec KÃœHLER H2O 920 "dual fan" "out"

2 rear 50mm "out"

1 side 200mm "in"

#6
Posted 02/27/2012 07:52 PM   
[quote name='cociotfp' date='27 February 2012 - 07:52 PM' timestamp='1330372367' post='1375845']
I have used a airdust spray but it is still the same 10-12c in temp.
i have a Thermaltake Element V with:
2 front fans 120mm "in"
1 top 200mm "out"
1 rear 120mm Antec KÃœHLER H2O 920 "dual fan" "out"
2 rear 50mm "out"
1 side 200mm "in"
[/quote]
Are the two front fans blowing against the 590 ??
[quote name='cociotfp' date='27 February 2012 - 07:52 PM' timestamp='1330372367' post='1375845']

I have used a airdust spray but it is still the same 10-12c in temp.

i have a Thermaltake Element V with:

2 front fans 120mm "in"

1 top 200mm "out"

1 rear 120mm Antec KÃœHLER H2O 920 "dual fan" "out"

2 rear 50mm "out"

1 side 200mm "in"



Are the two front fans blowing against the 590 ??

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#7
Posted 02/28/2012 08:30 AM   
[quote name='*Scar*' date='28 February 2012 - 09:30 AM' timestamp='1330417832' post='1376056']
Are the two front fans blowing against the 590 ??
[/quote]

yes they are.
I have not change anything from befor when there was only 1-3c diff in temp.
[quote name='*Scar*' date='28 February 2012 - 09:30 AM' timestamp='1330417832' post='1376056']

Are the two front fans blowing against the 590 ??





yes they are.

I have not change anything from befor when there was only 1-3c diff in temp.

#8
Posted 02/28/2012 10:56 AM   
[quote name='cociotfp' date='28 February 2012 - 10:56 AM' timestamp='1330426565' post='1376097']
yes they are.
I have not change anything from befor when there was only 1-3c diff in temp.
[/quote]
Darn was hoping that it was the anser becouse of the airflow of the card puzzeled now only thing could be the dust
It cant hurt to turn of the front two fans
[quote name='cociotfp' date='28 February 2012 - 10:56 AM' timestamp='1330426565' post='1376097']

yes they are.

I have not change anything from befor when there was only 1-3c diff in temp.



Darn was hoping that it was the anser becouse of the airflow of the card puzzeled now only thing could be the dust

It cant hurt to turn of the front two fans
Attachments

gtx590airflow1a.jpg

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#9
Posted 02/28/2012 11:08 AM   
[quote name='*Scar*' date='28 February 2012 - 12:08 PM' timestamp='1330427301' post='1376099']
Darn was hoping that it was the anser becouse of the airflow of the card puzzeled now only thing could be the dust
It cant hurt to turn of the front two fans
[/quote]

I tryed turning off the fans and it is still the same.
i have tryed a airdust can on the card. do i need to open it op like the foto and how do i do that?
I did have the gtx 590 out as i put in a ssd. Can the cover be lose so the air dont give the right amount on the gpu1?
[quote name='*Scar*' date='28 February 2012 - 12:08 PM' timestamp='1330427301' post='1376099']

Darn was hoping that it was the anser becouse of the airflow of the card puzzeled now only thing could be the dust

It cant hurt to turn of the front two fans





I tryed turning off the fans and it is still the same.

i have tryed a airdust can on the card. do i need to open it op like the foto and how do i do that?

I did have the gtx 590 out as i put in a ssd. Can the cover be lose so the air dont give the right amount on the gpu1?

#10
Posted 02/28/2012 11:56 AM   
[quote name='cociotfp' date='28 February 2012 - 11:56 AM' timestamp='1330430199' post='1376102']
I tryed turning off the fans and it is still the same.
i have tryed a airdust can on the card. do i need to open it op like the foto and how do i do that?
I did have the gtx 590 out as i put in a ssd. Can the cover be lose so the air dont give the right amount on the gpu1?
[/quote]
Im hoping these will help you /blink.gif' class='bbc_emoticon' alt=':blink:' />
[quote name='cociotfp' date='28 February 2012 - 11:56 AM' timestamp='1330430199' post='1376102']

I tryed turning off the fans and it is still the same.

i have tryed a airdust can on the card. do i need to open it op like the foto and how do i do that?

I did have the gtx 590 out as i put in a ssd. Can the cover be lose so the air dont give the right amount on the gpu1?



Im hoping these will help you /blink.gif' class='bbc_emoticon' alt=':blink:' />

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#11
Posted 02/28/2012 12:13 PM   
[quote name='*Scar*' date='28 February 2012 - 01:13 PM' timestamp='1330431212' post='1376105']
Im hoping these will help you /blink.gif' class='bbc_emoticon' alt=':blink:' />
[/quote]

okay. i am a to big of a chicken to do that
[quote name='*Scar*' date='28 February 2012 - 01:13 PM' timestamp='1330431212' post='1376105']

Im hoping these will help you /blink.gif' class='bbc_emoticon' alt=':blink:' />





okay. i am a to big of a chicken to do that

#12
Posted 02/28/2012 12:55 PM   
[quote name='cociotfp' date='28 February 2012 - 12:55 PM' timestamp='1330433749' post='1376121']
okay. i am a to big of a chicken to do that
[/quote]

If you are sure of the software and the settings and the only thing is taking it apart and if your affraid of doing that let your local shop do the job and let them applay arctic silver
Better safe then sorry /thumbup.gif' class='bbc_emoticon' alt=':thumbup:' /> I cant hand you better pctures of how to do it /unsure.gif' class='bbc_emoticon' alt=':unsure:' />
[quote name='cociotfp' date='28 February 2012 - 12:55 PM' timestamp='1330433749' post='1376121']

okay. i am a to big of a chicken to do that





If you are sure of the software and the settings and the only thing is taking it apart and if your affraid of doing that let your local shop do the job and let them applay arctic silver

Better safe then sorry /thumbup.gif' class='bbc_emoticon' alt=':thumbup:' /> I cant hand you better pctures of how to do it /unsure.gif' class='bbc_emoticon' alt=':unsure:' />

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#13
Posted 02/28/2012 01:21 PM   
reading through your specs, why don't you try to get the side fan in a out setup to force air to pass by the cards. I am saying this because I had SLI before and had a side fan. I thought pushing air on it would be good, but I had better results forcing air out underneath the bottom card. It deacreased the temps. At the time, I saw a temp difference of 3 to 5 degrees between the top and bottom card.

Right now I deactivated one of the top 200mm in my rig because the two 200mm fans on top were actually stealing air flow before it reached the radiatior of the Kuhler. I stopped one of the fan and temps dropped by 3c. So I concluded that lots of fan is good, but orginazing them properly to maximize air flow is better :)

Anyway, try also to get GPUZ to check on the fan speed for both cards. Kinda weird that one shows 0% and the other has the right fan speed...
reading through your specs, why don't you try to get the side fan in a out setup to force air to pass by the cards. I am saying this because I had SLI before and had a side fan. I thought pushing air on it would be good, but I had better results forcing air out underneath the bottom card. It deacreased the temps. At the time, I saw a temp difference of 3 to 5 degrees between the top and bottom card.



Right now I deactivated one of the top 200mm in my rig because the two 200mm fans on top were actually stealing air flow before it reached the radiatior of the Kuhler. I stopped one of the fan and temps dropped by 3c. So I concluded that lots of fan is good, but orginazing them properly to maximize air flow is better :)



Anyway, try also to get GPUZ to check on the fan speed for both cards. Kinda weird that one shows 0% and the other has the right fan speed...

#14
Posted 02/28/2012 01:22 PM   
[quote name='Genesis1' date='28 February 2012 - 01:22 PM' timestamp='1330435371' post='1376131']
reading through your specs, why don't you try to get the side fan in a out setup to force air to pass by the cards. I am saying this because I had SLI before and had a side fan. I thought pushing air on it would be good, but I had better results forcing air out underneath the bottom card. It deacreased the temps. At the time, I saw a temp difference of 3 to 5 degrees between the top and bottom card.

Right now I deactivated one of the top 200mm in my rig because the two 200mm fans on top were actually stealing air flow before it reached the radiatior of the Kuhler. I stopped one of the fan and temps dropped by 3c. So I concluded that lots of fan is good, but orginazing them properly to maximize air flow is better :)

Anyway, try also to get GPUZ to check on the fan speed for both cards. Kinda weird that one shows 0% and the other has the right fan speed...
[/quote]

So you think these are two cards /verymad.gif' class='bbc_emoticon' alt=':verymad:' /> sorry dude its onley one with two cores and one fan and one temp problem if you take a look at the pictures you could have known /rofl.gif' class='bbc_emoticon' alt=':rofl:' />
[quote name='Genesis1' date='28 February 2012 - 01:22 PM' timestamp='1330435371' post='1376131']

reading through your specs, why don't you try to get the side fan in a out setup to force air to pass by the cards. I am saying this because I had SLI before and had a side fan. I thought pushing air on it would be good, but I had better results forcing air out underneath the bottom card. It deacreased the temps. At the time, I saw a temp difference of 3 to 5 degrees between the top and bottom card.



Right now I deactivated one of the top 200mm in my rig because the two 200mm fans on top were actually stealing air flow before it reached the radiatior of the Kuhler. I stopped one of the fan and temps dropped by 3c. So I concluded that lots of fan is good, but orginazing them properly to maximize air flow is better :)



Anyway, try also to get GPUZ to check on the fan speed for both cards. Kinda weird that one shows 0% and the other has the right fan speed...





So you think these are two cards /verymad.gif' class='bbc_emoticon' alt=':verymad:' /> sorry dude its onley one with two cores and one fan and one temp problem if you take a look at the pictures you could have known /rofl.gif' class='bbc_emoticon' alt=':rofl:' />

GPU: Asus gtx Titan
CPU: Intel i7 975 @ 4.5
Motherboard: Asus Rampage 2 Extreme
System Memory: Corsair DDR3 @1600
Primary Monitor: Benq
Operating System: Windows 7 64
HDD Type: Samsung 840 pro AHCI
PSU: Corsair 860
Sound: Creative soundblaster X-Fi

#15
Posted 02/28/2012 01:37 PM   
  1 / 3    
Scroll To Top